PBXes » English
» Bugs
» RE: Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", an |
|
|
|
|
tic
Grünschnabel
Registration Date: 17.06.2010
Posts: 17
|
|
Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", and wi |
|
Can anyone help?
i need to setup basic trunk override, i.e.
by dialing 01112223333, i want it to be routed via a specific trunk, without 0 prefix.
i set up additional outgoing rule, move it to the top of the list,
tried setting custom dial rule
0|XXXXXXXXXX
but it always passes the number with unwanted prefix (0)
tried another rule
0|.
but upon save, it becomes 0| for unknown reason, and the number is still dialed as 01112223333, not 1112223333
yes, i selected the radio button for custom dial rule.
yes, i tried putting the pattern into "Numbers starting by:" field
yes, i tried checking "Separate prefix"
nothing works!
am i doing anything wrong?
any help greatly appreciated!!!
|
|
17.11.2012 21:20 |
|
pas
Grünschnabel
Registration Date: 03.08.2006
Posts: 43
|
|
|
27.11.2012 16:23 |
|
baz
Registration Date: 01.01.1970
Posts:
|
|
|
29.11.2012 00:07 |
|
tic
Grünschnabel
Registration Date: 17.06.2010
Posts: 17
|
|
RE: Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", an |
|
well, i want to use 0 only as a trunk override prefix
so if i dial 02525, i want it to be routed via this particular trunk, and i want 2525 to be dialed, not 02525.
or, in another words, i was thinking to place this trunk on top, and set a rule so that only numbers starting with 0 will be let through it, and dialed without leading zero.
this is a basic wish i think, but i didn't find anything on this in help (
|
|
01.12.2012 16:38 |
|
tel
Premium Account
Registration Date: 28.07.2008
Posts: 252
|
|
|
02.12.2012 02:43 |
|
|
|
|
|
|
|