DB Error: unknown error 07.07.2010 16:25

Forum: Bugs

I have this message DB Error: unknown error all the time I triy to access routes, trunks, call details ect....
Help please?
Thanks

Pennytel configuration 12.02.2009 02:32

Forum: Providers

Hello,

I cannot configure Pennytel (pennytel.com.au) to work with pbxes.

I doubled (triplleld) checked everything but it's not working.
Could you help ?


Thanks a lot,

raphael

(sip responses : 100, 183, 401, and 603 declined ! )

EDIT : Incomming calls seems to work if fax in disabled, but no outgoing calls ? (even if credit and works with softphone)

EDIT2 : from customer service Pennytel:

Darren: Please be informed that we do not provide support for your device however you may refer to the basic/SIP settings below : Line Enable: YES SIP Port: 5060 Proxy : sip.pennytel.com *Subscriber Information Display: ANY NAME User ID: PENNYTEL NUMBER Password: VOIP PASSWORD (Original password from email) Used Auth ID : YES Auth ID : PENNYTEL NUMBER codec : G729a, G711a, G711u

EDIT 3 : PROBLEM SOLVED (was a dial plan problem)

RE: Call recordings (Call Monitor) 26.08.2008 18:38

Forum: Queues, Digital Receptionist, Faxmail, Voicemail and Ring Groups

Ok I found it ! Thanks for your help !!
Raphael

RE: Call recordings (Call Monitor) 26.08.2008 02:46

Forum: Queues, Digital Receptionist, Faxmail, Voicemail and Ring Groups

Thanks for the reply, but how can I send calls received on an extension directly to the pstn number ? Thanks

Call recordings (Call Monitor) 25.08.2008 02:37

Forum: Queues, Digital Receptionist, Faxmail, Voicemail and Ring Groups

Hello,

I have a ring group which forward the call to some extensions and my cellular. If I pick up the call with my cellular, there is no call recordings (ability to download the .wav). How can I enable this ? Thanks a lot

RE: 3starsnet.com 19.08.2008 23:43

Forum: Providers

YES !!!! it's working !! Thanks a lot for your help !!!

RE: 3starsnet.com 19.08.2008 16:32

Forum: Providers

Two last ones :

Aug 19 16:28:24 NOTICE[5267] chan_sip.c: Failed to authenticate on REGISTER to '028889216@sip.3starsnet.com' (Tries 3)
Aug 19 16:29:23 NOTICE[5267] chan_sip.c: -- Registration for '028889216@sip.3starsnet.com' timed out, trying again (Attempt #52
Aug 19 16:29:24 NOTICE[5267] chan_sip.c: Failed to authenticate on REGISTER to '028889216@sip.3starsnet.com' (Tries 3)
Aug 19 16:30:23 NOTICE[5267] chan_sip.c: -- Registration for '028889216@sip.3starsnet.com' timed out, trying again (Attempt #532)
Aug 19 16:30:24 NOTICE[5267] chan_sip.c: Failed to authenticate on REGISTER to '028889216@sip.3starsnet.com' (Tries 3)



Thanks

RE: Grandstream HT-503 FXO CID 18.08.2008 23:56

Forum: Terminal Equipment

How did you register pbxes with HT-503 ? Weeks I'm trying to do so ! Please help ;-)

Thanks a lot

Zitat:

Originally posted by duikerict Hi there! Is there any testing done with the FXO port of the Grandstream HT-503? I registered the FXO port with a normal extention and telling the HT-503 to Unconditional Call Forward to a caller group. Currently on the devices in the caller group, the Extention ID of the FXO is seen, but I would love to see the Caller ID of the one, calling my PSTN/FXO... Any ideas? PSTN = NL KPN with CALLER ID.

RE: 3starsnet.com 18.08.2008 23:55

Forum: Providers

Yes, it works perfectly with Ata's and Voxalot
Don't understand why it doesn't work here

RE: 3starsnet.com 18.08.2008 19:19

Forum: Providers

thanks for the reply. I already did that but on the status page, it's grey and I receive trunk outage emails. Could you eventualy check in the log ? Thks

3starsnet.com 18.08.2008 15:55

Forum: Providers

Hello,

I cannot connect to 3starsnet.com, my voip-in number (not possible to have sip-uri)

The normal register string is : user:pass@sip.3starsnet.com/user

How can I enable that in my trunks ?

Thanks

RE: Grandstream HT-503 12.08.2008 10:11

Forum: Terminal Equipment

That's strange because it was really easy for voxalot (just username, password and sip server), as it was for a vmware image of PbxInAFlash. It's just Pbxes that doesn't work... (as formy DVG-G1402S, see other post)

RE: Grandstream HT-503 10.08.2008 14:03

Forum: Terminal Equipment

My mistake, sorry...

here the correct link :

http://www.grandstream.com/user_manuals/GUI/GUI_HT503.rar

Well, I just entered pbxes.org (tried sip.pbxes.org and ip address) with different ports and user login + password...

Thanks for your help,
Raphael

RE: Grandstream HT-503 08.08.2008 18:01

Forum: Terminal Equipment

I tried but I can't port forward for access.. I'll try again in a minute

Thanks a lot for your help

EDIT : here the downloadable settings :
http://www.raphoumail.com/GUI_HT488.rar
Thanks

RE: DVG-G1402S can't register - help 08.08.2008 17:30

Forum: Terminal Equipment

for sure :

DVG-G1402S from D-Link : http://www.dlink.com/products/?pid=446

thanks for your help

Grandstream HT-503 08.08.2008 10:37

Forum: Terminal Equipment

Hello,

What are the parameters to put in my Grandstream HT-503 ?
I tried almost all combinations but it can't register neither. It works perfectly with other providers.

Thanks for your help,

Raphael.

DVG-G1402S can't register - help 08.08.2008 10:36

Forum: Terminal Equipment

Hello,

What are the parameters to put in my DBG-G1402S ?
I tried almost all combinations but it can't register. It works perfectly with other providers.

Thanks for your help,

Raphael.

The same with IPness 05.10.2006 10:11

Forum: Providers

Hello,
Before going on and configure all my trunks, I have a important question…
I have a sip provider which request particular registration string and port 6060
Here the details he provided me :


[general]
context=default
bindport=5060
bindaddr=0.0.0.0
srvlookup=yes
tos=lowdelay
disallow=all
allow=ilbc
allow=g729
allow=alaw
allow=ulaw
language=fr
canreinvite=no
dtmfmode=auto

register => TELNUMBER : PASSWORD : USERNAME @ipness.net:6060

[ipness]
type=friend
host=ipness.net
fromuser= TELNUMBER
fromdomain=ipness.net
username= USERNAME
secret= PASSWORD
insecure=very
context=from-ipness
port=6060
canreinvite=no
disallow=all
allow=alaw
allow=g729

How could I do that ?

My ID is raphoumail.

Thanks a lot,

Raphael