Codes

From PBXes

Revision as of 13:45, 5 November 2018 by i-p-tel (Talk | contribs)
Jump to: navigation, search

The following functions and features are available from the phones:

Contents

When Connected

These codes are detected only if the digits are entered very quickly.

  • ## Attended Transfer
While on conversation with another party, you dial the "#" key twice. The PBX says "Transfer" then gives you a dial tone, while put the other party on hold music. You dial the transferee number and talk with the transferee to introduce the call, then you can hang up and the other party will be connected with the transferee.
In case the transferee does not want to answer the call, he/she simply hangs up or dial *0 and you will be back to your original conversation.
Caution: When transferring outbound calls to external parties you as the caller get replaced by the external party which itself becomes able to transfer and make calls over your PBX.
  • ##70 Call Park
While in a conversation, press "#" twice to initiate a transfer, then dial 70. The PBX will now announce the parking extension, most probably 71 or 72. Now hang up - the caller will be left on hold at the announced extension. Walk up to a different phone, dial 71 and voila the conversation can be continued. If a caller has been parked for longer than 45 seconds then the PBX will again ring the originally dialed extension.
  • *1 One Touch Record
Prior to using this feature, on demand recording has to be allowed on the particular extension. To listen to it sign in to the extension.
  • *2 Blind Transfer
Dial *2 followed by the extension number you intend to transfer the call to, e.g. *2xxx for a 3-digit extension or *2xxxx for a 4-digit extension. A similar string should be included in the dial-plan of the ATA or IP-phone as well, otherwise the call might not be allowed through. The other party will be immediately connected with the transferee. You get a new dial-tone.
Caution: When transferring outbound calls to external parties you as the caller get replaced by the external party which itself becomes able to transfer and make calls over your PBX.

Diagnostic Announcements

  • *43 Echo Test
  • *60 Time Request
Announces Central European Time.
  • 666 Incoming Fax Simulation
  • 7777 Incoming Call Simulation

Configuration

  • *43# Call Waiting Activation
  • #43# Call Waiting Deactivation
This feature is deactivated by default.
  • *78 Do-Not-Disturb Activation
  • *79 Do-Not-Disturb Deactivation
  • <queue no.>* Agent Login
  • <queue no.>** Agent Logout

Call Forwarding

  • *21*<destination> Call Forwarding Unconditional Activation
  • #21# Call Forwarding Unconditional Deactivation
  • *61*<destination>**<seconds> Call Forwarding on No Answer Activation
If **<seconds> is omitted, it'll be 20 seconds.
  • #61# Call Forwarding on No Answer Deactivation
  • *62*<destination> Call Forwarding on Unavailable Activation
Calls are forwarded on unavailable i.e. in case the SIP extension is not registered. This allows the activation of a "Follow Me" calling. To permanently check for unavailability option connectioncheck in extensions (only PRO and Premium, with Handoff) should be enabled, or choose a short registration interval.
  • #62# Call Forwarding on Unavailable Deactivation
  • *67*<destination> Call Forwarding on Busy Activation
  • #67# Call Forwarding on Busy Deactivation
  • *481*<destination> Call Forking Activation
  • #481# Call Forking Deactivation
  • *004*<destination>**<seconds> All Conditional Forwards Activation
If **<seconds> is omitted, it'll be 20 seconds.
  • #004# All Conditional Forwards Deactivation
  • #002# All Forwards Deactivation

Voicemail

  • *97 Message Center (won´t ask for an extension)
  • *98 Message Center (will ask for an extension)
  • *<extension> Leave a voicemail
To hear your voicemail from outside dial *<voicemail pin># when the answering machine starts.

Miscellaneous

  • **<extension> Call Pickup
This feature allows you to pick up calls that are ringing or put on hold at a specific extension. If the extension is not is use it will page it (with selected phones e.g. Snom, Aastra, Grandstream and Linksys). This feature is not supported by classical extensions.
  • *8*** Global Call Pickup
  • *411 Directory
  • *69 Trace Call
Get CallerID of last call.
  • 8<extension> Conference
Each extension you create will have its own conference. For example extension 200 has conference 8200. Just dial 8200 to get into your conference. Add participants by transferring them to 8200. The first participant will hear on hold music.
The conference may be exited by pressing a digit. The extension number of the digit gets called.
By pressing * you get a menu, e.g. *3 lets you eject the most recent participant of the conference.