PBXes » Deutsch » Sonstiges » Wird "+" in Nummer nicht unterstützt?
Print Page | Recommend to Friend | Add Thread to Favorites
Post New Thread Post Reply
Author
Post « Previous Thread | Next Thread »
ask
Grünschnabel


Registration Date: 23.12.2006
Posts: 35

Fragezeichen Wird "+" in Nummer nicht unterstützt? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

Hallo.

Ich habe neulich versucht von meinem iPhone mit
Fring bzw. siphon via pbxes zu telefonieren. Das funktionierte nicht, da Fring immer und ausschliesslich "+<Ländercode>" (also z.B. +41) wählt und siphon macht das per Default.

Aus dem System Log, als ich Fring verwendet habe:

code:
Jul 7 20:21:27 VERBOSE[27339] logger.c: We're at 78.xx.xxx.143 port 44442
Jul 7 20:21:27 VERBOSE[27339] logger.c: Video is at 78.xx.xxx.143 port 44298
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding codec 0x4 (ulaw) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding codec 0x8 (alaw) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding codec 0x10 (g726) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding codec 0x400 (ilbc) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding codec 0x2 (gsm) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding codec 0x80000 (h263) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding codec 0x100000 (h263p) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: Adding non-codec 0x1 (telephone-event) to SDP
Jul 7 20:21:27 VERBOSE[27339] logger.c: -- Called +4176xxxxxxx@pbxes.org
Jul 7 20:21:27 VERBOSE[27339] logger.c: -- SIP/pbxes.org-da0c is circuit-busy
Jul 7 20:21:27 VERBOSE[27339] chan_sip.c: Hangup call SIP/pbxes.org-da0c, SIP callid [EMAIL]470b859e710b032a114653dc40f02eed@78.xx.xxx[/EMAIL].143
Jul 7 20:21:27 VERBOSE[27339] logger.c: == Everyone is busy/congested at this time (1:0/1/0)
Jul 7 20:21:27 VERBOSE[27339] chan_sip.c: Hangup call SIP/askwar77-77-e187, SIP callid 8mNm9dXvsIzRtrVPmoFsNKM5uuca03pW 


Wichtig hier: +4176xxxxxxx@pbxes.org.

Wenn ich bei siphon statt der "+" "00" wählen lasse (also "004176xxxxxxx"), dann klappt's mit dem Anruf.

Was ist wie zu konfigurieren, so das auch ein + gewählt werden kann?

Danke,
Alexander

10.07.2009 08:42 askwar77 is offline Search for Posts by askwar77 Add askwar77 to your Buddy List
 
Post New Thread Post Reply
Go to:

Powered by Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English Translation by Satelk