When I use eyebeam, I can put a caller on hold by pressing the "hold" button and the caller hears on-hold music. When I'm on an extension (i.e. my cordless phone plugged into ATA or my mobile phone that is ringed through PSTN) that doesn't support this method of "hold", is there a way I can put the caller on hold and have them hear the on-hold music? I can put the call on park (##70) or transfer them (##) but then I can't pick that call back up. I'd envision this working by pressing * or # and then the same key again to pick back up. Is this possible?
What would be the purpose of putting on hold when not initiating a transfer?
You could check the features of your ATA and your mobile phone. Some ATAs and most mobile phones allow you to switch calls by pressing the flash key or the green button.
I would be interested to find out if your ATA will put the call on hold, when using the Call-Waiting function on that particular extension.
For this to work, Call-Waiting must be activated by dialing *70 on that extension first. Then while on a call, generate another call to that extension, hit the flash key or the hook key, switch to the other call and when the second call ends, ask the person on the first call to tell you if they heard the On Hold music.
It would also be helpful to know what kind of ATA you have.
Using flash does work for 30 seconds or so. If I flash, then hang up, 30 seconds later the phone rings me back. Not desirable.
If I flash, then don't hang up, I get the loud busy signal after 15 or so seconds. Also not desirable.
It seems like a great feature would be if I could press a key (like ## or **) and then put the caller on hold and while the caller hears music, I'd get to hear the caller.
Yes, call waiting works. I can switch over to another call and the original caller hears the music on hold. However, this obviously isn't a working solution for everyday use since I don't want to have to generate a new call when I want to put someone on hold.
The requested feature has been implemented (click on the red bar to adopt the update):
Just press ## as before and transfer the caller to 70. This is the parking lot. You and the calling party are put on hold hearing music. To get the call off hold you need to press *0 then.