- I have only one extension
- I have several SIP trunks: A - B - C - D - E (five Trunks).
- In the Outbound Routing 0 I have in the Trunk Sequence = Provider A and B.
- In the Outbound Routing 1 I have in the Trunk Sequence = Provider C only
- - In the Outbound Routing 2 I have in the Trunk Sequence = Provider E only
By using provider A, B and E:
- if I dial the number 0xx. I want 00390xx.
- if I dial 00xx. the dialed number should remain as it is
- if I dial 3.xx then 00393xx. is added and it should go out by using Provider B only
As the Trunk Sequence is smart enough to try next Trunk if the first one is busy or maximum calls are reached, Provider B should go out with 0xx. and 00xx. but it should be the only one allowed to dial out numbers beginning with 3xx. (0039 added so it dials 00393xx.)
By using provider C:
- if I dial 800xx. it must go with provider C
- if I dial 90xx. the 9 shuld be stripped and only 0xx. goes out.
Can you explain this please?
Thank you very much and thank you for pbxes! It's GREAT!
Dialplans
