PBXes » English » Terminal Equipment » new FreePBX - unable to call out (resolved)
Print Page | Recommend to Friend | Add Thread to Favorites
Post New Thread Post Reply
Author
Post « Previous Thread | Next Thread »
art
Grünschnabel


Registration Date: 05.11.2006
Posts: 37

new FreePBX - unable to call out (resolved) Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

On the trunk CID Options forced Trunk CID and inserted Outbound CallerID as trunk name. This may not be the most elegant solution but it works.
I am still unable to receive calls into the local PBX

Have upgraded my (ancient) Trxibox to FreePBX Distro. Now trying to port over services. Did not make any changes to PBXES.
When I call out the call is redirected to the default inbound route (of PBXES)

Did a SIP trace and extracted the "area" of the redirection as:


May 14 02:05:53 VERBOSE[69298] logger.c: Non-codec capabilities: us - 0x1 (telephone-event), peer - 0x1 (telephone-event), combined - 0x1 (telephone-event)
May 14 02:05:53 VERBOSE[69298] logger.c: Looking for 00202YYYYYYYY in from-pstn (domain pbxes.org)
May 14 02:05:53 VERBOSE[69298] logger.c: list_route: hop: <sip:204@77.69.186.124:5060>
May 14 02:05:53 VERBOSE[69298] logger.c: Transmitting (NAT)
May 14 02:05:53 VERBOSE[119579] logger.c: -- Called 0097339XXXXXX@from-internal/n
May 14 02:05:53 VERBOSE[119614] logger.c: We're at 88.198.69.250 port 40218
May 14 02:05:53 VERBOSE[119614] logger.c: Video is at 88.198.69.250 port 41916
May 14 02:05:53 VERBOSE[119614] logger.c: Adding codec 0x1000 (g722) to SDP
May 14 02:05:53 VERBOSE[119614] logger.c: Adding codec 0x4 (ulaw) to SDP
May 14 02:05:53 VERBOSE[119614] logger.c: Adding codec 0x8 (alaw) to SDP
May 14 02:05:53 VERBOSE[119614] logger.c: Adding codec 0x10 (g726) to SDP
May 14 02:05:53 VERBOSE[119614] logger.c: Adding codec 0x400 (ilbc) to SDP
May 14 02:05:53 VERBOSE[119614] logger.c: Adding codec 0x200 (speex) to SDP
May 14 02:05:53 VERBOSE[119614] logger.c: Adding codec 0x2 (gsm) to SDP
May 14 02:05:53 VERBOSE[119614] logger.c: 13 headers, 14 lines
May 14 02:05:53 VERBOSE[119614] logger.c: Reliably Transmitting (NAT)
May 14 02:05:53 VERBOSE[119614] logger.c: -- Called 13338700/39XXXXXX
May 14 02:05:53 VERBOSE[69298] logger.c:
May 14 02:05:53 VERBOSE[69298] logger.c: --- (17 headers 0 lines)May 14 02:05:53 VERBOSE[69298] logger.c: --- (17 headers 0 lines)---

Where:
00202YYYYYYYY is the number I'm trying to call
sip:204@77.69.186.124:5060 is the extension (local)
39XXXXXX is the number call is redirected to

Warning: I'm also facing this problem with another service (i.e. I KNOW this problem is on my side, but I don't know how to solve it)

This post has been edited 3 time(s), it was last edited by art on 27.05.2012 at 11:53.

14.05.2012 00:39 artarzi is offline Search for Posts by artarzi Add artarzi to your Buddy List
 
Post New Thread Post Reply
Go to:

Powered by Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English Translation by Satelk