PBXes » English » Providers » RE: voip.ms: call forwarding?
Print Page | Recommend to Friend | Add Thread to Favorites
Post New Thread Post Reply
Author
Post « Previous Thread | Next Thread »
cc


Registration Date: 01.01.1970
Posts:

voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

I'm currently using callwithus for call forwarding to my cell phone. I wanted to give voip.ms a try.

When I setup voip.ms like I do with CWU (ie: password:username in the password field, username field blank), it doesn't work - I get ResetCDR. I can't get it to work correctly.

Has anyone used voip.ms this way before?

Thanks!

04.01.2010 08:12 cc is offline Search for Posts by cc Add cc to your Buddy List
bob


Registration Date: 01.01.1970
Posts:

RE: voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

I have not used them, I use voicetrading and there the trick in the password field: password:username and username blank causes caller id to be forwarded to my mobile.

I don't know if voip.ms allows you to set any caller id, maybe not. In that case you would have to use the regular setting for username and password and the caller id of the one that calls you is not forwarded.

form their website faq

Do you pass callerid?
On our premium route, All US/Canada destinations will receive proper callerid. On the value route, we can not guarantee callerid will pass 100% of the time but it should in most cases.


So they can forward caller id when you activate callforwarding at their site. I assume that you now do forwarding through pbxes. I also says that on non premium routes they can't guarantee call forwarding.

This post has been edited 1 time(s), it was last edited by bob on 04.01.2010 at 10:19.

04.01.2010 10:15 bobmats is offline Search for Posts by bobmats Add bobmats to your Buddy List
cc


Registration Date: 01.01.1970
Posts:

RE: voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

Hi bobmats,

Sorry for taking so long to write back.

Like I said in my first post, I'm doing the password:username trick for voip.ms (using premium routes) and it doesn't work - but it does work with CWU. :/

The only way I can get the voip.ms trunk to work is when I fill in both the username and password field. Then, obviously, CID forwarding doesn't work - but at least the call completes.

Are there any other tricks for me to try? What would cause a ResetCDR from voip.ms? Any help would be greatly appreciated!

Thanks!

09.01.2010 08:45 cc is offline Search for Posts by cc Add cc to your Buddy List
ayk


Registration Date: 01.01.1970
Posts:

RE: voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

I use Voip.ms for call forwarding and they work with forwarding CID.

Make sure you have one trunk with the same username/password combination registered on the same voip.ms server. Then the username blank and password = password:username trick works with a trunk that's not set to register.

Hope this helps.

11.01.2010 22:05 ayking is offline Search for Posts by ayking Add ayking to your Buddy List
cc


Registration Date: 01.01.1970
Posts:

RE: voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

Hi ayking!

Are you saying you have two trunks setup for voip.ms? Thus you have two voip.ms subaccounts?

trunk1: voip.ms1
username: voip.ms username (subaccount 1)
password: voip.ms password
Register: yes

trunk2: voip.ms2
username:
password: password:username (subaccount 2)
Register: no

Is this right? Thanks a bunch for confirming that it can work! smile

12.01.2010 02:09 cc is offline Search for Posts by cc Add cc to your Buddy List
ayk


Registration Date: 01.01.1970
Posts:

RE: voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

Nope, it's the same voip.ms subaccount.

Trunk1: voip.ms
username: voip.ms username
password: voip.ms password
server: sip??.us.voip.ms
register: yes

Trunk2: voip.ms CID
username: <blank>
password: password:username
server: same server as trunk1
register: no

14.01.2010 18:45 ayking is offline Search for Posts by ayking Add ayking to your Buddy List
cc


Registration Date: 01.01.1970
Posts:

RE: voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

ayking,

That worked great! How did you figure that out?

Anyway, thanks a lot! smile

-Rob

15.01.2010 08:06 cc is offline Search for Posts by cc Add cc to your Buddy List
ayk


Registration Date: 01.01.1970
Posts:

RE: voip.ms: call forwarding? Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

I got it from this forum as well, from none other than bobmats himself! großes Grinsen Both of us need to thank him...haha

http://www4.pbxes.com/forum/thread.php?threadid=166

19.01.2010 22:17 ayking is offline Search for Posts by ayking Add ayking to your Buddy List
 
Post New Thread Post Reply
Go to:

Powered by Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English Translation by Satelk