I had installed trunks that were working fine. Now in the last 24 hours they have stopped working, and I do not see why. I still have working trunks but some no longer work. I have even tried to re-create them , and they still do not work. Those trunks tested working on xpro and a Sipura
It seems I can not dial out on them I get the all circuits are busy message.
This post has been edited 1 time(s), it was last edited by sup on 20.04.2006 at 22:51.
I have experienced this problem with SipDiscount and to some degree with Supernettel trunk(see below). PlainVoIP is working, as are SIPPhone and FWD trunks.
This also may be related to the fact that you can not set up classic extensions with some providers as well, and that with other providers any system dialed number (not dialed from UA) does not seem to work.
Also I have developed some problems with inbound DIDs that MAY be related. about 24 hours ago, one new DID that I had set up for my wife's private line just stopped working.
This post has been edited 2 time(s), it was last edited by sup on 21.04.2006 at 06:25.
Hello, I have the same problem with VOIPSTUNT and SIPDISCOUNT.
But if I set-up the params to my grandstream HT, it works fine!
Why it doesn't work only with ip-tel?
Bricky
I have the same problems with Finarea too. It worked all very well. But since 2 days i can not make calls anymore.
It shows so, as have Finarea have it makes so, that PBX and Finarea will never work anymore. Maybe the IP of PBX is in the black list by Finarea.
Maybe we can destroy the Problem, when we could change the IP all 24 hours.
PS: Vorgive me for my bad english - im´m German/Russian.
Sign up for an account at VoxALot.com, and register to your Finarea Account from Voxalot. You can then register the PBX to the Voxalot account, and problem solved.
Voxalot WILL work with Reinvites as I believe many of the Finarea providers will, so you should turn Audio bypass on on the trunk and re invite at least that leg of the call.
This in theory will also give you the added benefit of multi root emum look ups as well as access to the sipbroker.com peering codes. I however have had no lucjk dialing the peering codes through the PBX, as they all start with *
Voxalot Should work with inbounds as well, but I have never used inbounds on Voxalot.com.
This post has been edited 1 time(s), it was last edited by sup on 03.07.2006 at 09:41.
Has Finnera remained as rigid about their blocking of services? More and more people are running Trixboxes with them. I wonder whether they do something stupid like block the IP address of fraudulent registrations?
If one person tried to pull something using a PBXes account, we all would be blacklisted. The problem is that this group has no notion of customer service so they will never answer the question candidly or otherwise.
Some fools started running a call-back business through PBXes, and Finarea/Betamax blocked the IP. As a result Pascal had to remove the Call-Back feature from the basic accounts, and limit it to 3 on the Premium accounts.
It is unlikely that Finarea/Betamax will change their stand. There is no good reason for them to do so. So we now have to jump through hoops to use their service, which works sometimes.