PBXes » English » Miscellaneous » Pbxes Classical Extension & Sipura 3K PSTN
Print Page | Recommend to Friend | Add Thread to Favorites
Post New Thread Post Reply
Author
Post « Previous Thread | Next Thread »
mon
Premium Account


Registration Date: 17.10.2007
Posts: 109
Pbxes Classical Extension & Sipura 3K PSTN Post Reply with Quote Edit/Delete Post Report Post to a Moderator       IP Information Go to the top of this page

My Sipura 3K is configured to make VOIP to PSTN calls using the defined number in PSTN dial plan.

Trying to use Pbxes classical extension via sipura 3k, I feels the only way it can be made,1st initiate a SIP call(similar like in SIP extension) and once get dial tone from Sipura (which is possible by using dial plan) then the Pbxes extension dials out the PSTN number . It mean the Classical Extension should also have facility to dial out sip calls followed by PSTN Number.

Currently, the Classical extension can only be used if defined in trunk with outbound routing or if extension Inbound routing is defined then from cal can be made form outside.

This post has been edited 1 time(s), it was last edited by mon on 17.12.2008 at 11:25.
17.12.2008 07:39 montoo is offline Search for Posts by montoo Add montoo to your Buddy List
 
Post New Thread Post Reply
Go to:

Powered by Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English Translation by Satelk