PBXes » Search » Search Results
Showing posts 1 to 10 of 10 results
Author Post
Thread:
gde

Replies: 1
Views: 10382

Daumen hoch! 14.09.2007 05:37 Forum: Provider

Ist zwar nie beantwortet worden, aber behoben!
DANKE !!

Thread: RE: Kompatibilitäts-Liste
gde

Replies: 2
Views: 28326

Daumen hoch! 14.09.2007 05:32 Forum: Provider

Seit geraumer Zeit geht auch Internetcalls.com, d.h. die Blockade ist weg.
tpad.com läuft auch, aber unbedingt beachten: immer 9 vorwählen! z.B. Deutschland 0180-5 305000 (z.B. T-Online) = 900491805305000
Da eine Menge 0180-TEUER-Nummern gehen, sehr empfehlenswert.

Thread:
gde

Replies: 1
Views: 10382

Daumen runter! Nikotel Amtsleitung wech 07.05.2007 02:29 Forum: Provider

In PBXes wird meine Nikotel-Amtsleitung online gezeigt, bei Nikotel aber nicht. Ankommende Anrufe bekommen keine Verbindung. "Der gewünschte Gesprächspartner ist vorübergehend nicht erreichbar..."
Der Ausfall kam ohne mein Zutun (also ohne Änderung an der PBX) wahrscheinlich am 05. Mai 2007, evtl. ein paar Tage davor. Heute habe ich Nikotel mit der Fritzbox getestet. Geht. in PBXes nicht.

Sipgate geht dafür gut, wie eh und jeh...

Gruß
Gerhard

Thread:
gde

Replies: 3
Views: 13139

25.01.2007 06:50 Forum: Provider

Gerade wollte ich ein ähnliches Problem lösen:
aus 0049241xxx soll 0241xxx werden.
also eine Wahlregel mit 0049|241x. unter Abgehende Wahlregeln angelegt und bei der Amtsleitung Prefix 0 eingetragen.
Beides wurde nicht ausgeführt.
Ergebnis:
492414128xyz also 0049 war nicht weg, extra 0 war nicht drin.
Sonst könnte ich dem Kollegen sein Problem ja lösen.
Aus 99241xyz 0241xyz machen klappte aber.
Abgehende Wahlregel Wählfolge: "99|XX." und bei der zugehörigen Amtsleitung den Präfix "0" - schon liefs.

Gerhard

Thread: RE: Neue Funktion für Reseller
gde

Replies: 5
Views: 37259

25.01.2007 05:57 Forum: News

Hatte ich gerade auch - habe nur die temporären Dateien gelöscht - mit dem offline-quark, kookies liegen gelassen, ging auch wieder.
Gerhard

Thread: RE: Callback - inbound route
gde

Replies: 8
Views: 51032

25.01.2007 05:21 Forum: Bugs

There are even more ways to do it...
I try to explain it in English (I am German) as good as I can.
1. Organize a trunk what has what does the callback without filtering DTMF out. (I testet it with Sipgate http://www.sipgate.de but I use an old account there. Here some people reportet problems with this comany - just in Germany and with new accounts.
Anyway - any company with good prizes and DTMF pass through will do.
If this one has no or no cheap phone number included, organize an other trunk with phone number included. (p.e. http://nikotel.com sells phone numbers for only a vew dollars setup fee.)
Then integrate the trunk ore trunks here, in setup
Trunks - Add Trunk Add SIP Trunk
For example we name the trunks "pls_call_back" (this one needs to have a phone number) and "outgoing_cb" (this one needs to let DTMF pass through, but a phone number is not required)
maybe one trunk fits all your needs - then add only this one...
and check that they are online (green in status monitor).

Call the phone number assigned to "pls_call_back" and just let it ring.
Now you find your call and your phone number in the logbook of the pbx, the "Call Monitor".
Copy your phone number from there. We'll paste it later.
Now let's create a rule for your incoming call.
Go to "Inbound Routing"
Trunk = pls_call_back

Caller ID Number = Your-Phone-Number (copy it from the log and paste it here)
Highlight call back and enter your phone number in the way you want to get it dialed by the pbx.
Now create a rule for outgoing calls in "Outbound Routing" with just your number (exactly like the pbx has to dial it in the last step) and assign the line "outgoing_cb" (ore - if you have only one trunk - "pls_call_back")
In this way we keep the pbx in the future away from using a maybe cheaper line what does not work with DTMF.

Now we try it.
You ring the pbx
then you find your ring in the Call Monitor.
Hang up.
After this the pbx tries to phone from extension "s" to you. When the phone at home rings - pick it and listen to the dial tone. Tone comes - everything until here is OK. The rules worked already If not - search the reason - like Pascal wrote before.
Now - we are called and have a dial tone - use it! Phone your friend. If the dial tone does not disappear, the trunk "outgoing_cb" was a bad one - filters DTMF out. (Happened to me with Nikotel last week some was swollowed, some was doubled - I changed outgoing_cb to sipgate)
Now, if someone from outside phones you at your pbx - pbx does not know what to do.
For this we need one ore more extensions.
Then you can use the "Incoming Calls" rule to redirect those people to your VoIP-phone ore classic phone (im most countries it's not smart to use a mobile here, it works - but is expensive.)

btw if your phone number to call back is "0987654" you can write in the "inbound Routing" "9990987654"
and in Outbound Routing you use the Dial Pattern 999|0987654 - what cuts the 999 away.
When you do so, you are allowed to phone the same number with any other trunk - if it is not callback.

This will meet the needs of ambervoip in UK as well.
Hope, this helps a little,
Otherwise drop a message.

Gerhard

Thread: RE: codec for ADSL and even slower
gde

Replies: 1
Views: 11691

codec for ADSL and even slower 25.01.2007 02:09 Forum: Feature Requests

I just come back from an Egypian in Germany who wants to talk per VoIP to his family in Egypt. In Egypt they used a good PC, Windows XP and MSN Messenger 7.5 on a 56k-modem. (They are waiting for DSL)
We had a laptop with only 64 MB RAM, Windows98 SE and MSN Messenger 7.0.
Sound quality from Egypt (modem only) to here was OK. They reportet the same back.
That means:
The codec in MSN Messenger 7.x does it fully! Sorry, but I don't know which one they took.

Maybe one of you there knows more?

Gerhard

Thread:
gde

Replies: 2
Views: 9680

Nikotel 12.05.2006 02:17 Forum: Provider

Hab ich gemacht, funzt auch!
Eingehende Wahlregel:
1. von besagtem Telefon aus (oder gleichwertigem) Nikotel anrufen. (Besetzt reicht)
2. Log einsehen und Rufnummer von da mitnehmen.
49241xxx z.B. Arcor oder Telekom Aachen
49178xxxx E+
So kommt die Nummer an.

Für abgehende Wahl genügt 0241xxx nach Aachen.
Genau so habe ich eine Wahlregel mit 0241xxx für die Callback-Nummern. Läuft.
Du kannst auch Aachen mit 49241 anrufen, also Wahlverhalten und Wahlregel aufeinander abstimmen.
Bei Nikotel kannst Du Wahlregeln hinterlegen. Einloggen, linker Reiter (Da, wo auch die Adresse steht)
Also 497119290 würde bei mir NICHT beim SWR in Stuttgart klingeln, sondern irgendwo in Aachen.
00497119290 oder 07119290 klingelt in Stuttgart.
Grund ist die Nikotel-Wahlregel, Ortsnetz ist 0241 in 49 also 49 (0) 241

Gerhard

Thread: RE: CallTrough CallBack
gde

Replies: 1
Views: 8200

CallTrough CallBack 30.04.2006 04:03 Forum: Fehler

Ich habe mir einen CallBack (Lockruf Sipgate, Ausgang Nikotel) eingerichtet und getestet, geht. Auch die DTMF-Erkennung ging.
Nun habe ich daraus einen CallTrough gemacht.
Mit Pin funzt die Erkennung des Pin nicht, der war immer falsch:-(
Ohne pin - feld leer gelassen - bekomme ich einen Wählton, kann aber nicht wählen. Ich rufe Sipgate an und will über Nikotel wieder raus. Beim CallBack lief es doch... was ist los?
Gerhard

Thread: Scriptfehler auf https://pbx.i-p-tel.com
gde

Replies: 4
Views: 13271

05.04.2006 17:45 Forum: Fehler

Internet-Explorer!!!
Ganz einfach: Einige Toolbars etc. schalten die Scriptfehler-Meldung aus. Dann sieht man nichts davon.
Nun- raten Sie mal, warum ich die fehlerhafte Zeile mit gepostet habe?
Der Fehler ist doch gut sichtbar. Übrigens, ich habe den Script-Debugger installiert, der bei jedem Script-Fehler mir das Debuggen vorschlägt. Meinen Teil als Beta-Tester habe ich gemacht. Es fehlt jeweils das Hochkomma ' kurz vor Ende der Zeile. Jetzt sind Sie mit Ihrer Truppe dran. Ich kann Ihre Seite nicht ändern, also auch nicht verbessern.
Die 'Hochkommas' müssen eben paarweise auftreten, eine Zeile, die ein 'width=250 enthält, muß auch ein ' zum Abschluß der Stringkonstanten haben. Dasselbe gilt für die "Gänsefüßchen" .
mfg
Gerhard

Showing posts 1 to 10 of 10 results

Powered by Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English Translation by Satelk