PBXes (http://www1.pbxes.com/forum/index.php)
- English (http://www1.pbxes.com/forum/board.php?boardid=16)
-- Bugs (http://www1.pbxes.com/forum/board.php?boardid=24)
--- RE: Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", an (http://www1.pbxes.com/forum/threadid.php?threadid=1353180001)


Posted by tico on 17.11.2012 at 20:20:

Fragezeichen Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", and wi

Can anyone help?

i need to setup basic trunk override, i.e.
by dialing 01112223333, i want it to be routed via a specific trunk, without 0 prefix.

i set up additional outgoing rule, move it to the top of the list,
tried setting custom dial rule
0|XXXXXXXXXX
but it always passes the number with unwanted prefix (0)

tried another rule
0|.
but upon save, it becomes 0| for unknown reason, and the number is still dialed as 01112223333, not 1112223333

yes, i selected the radio button for custom dial rule.
yes, i tried putting the pattern into "Numbers starting by:" field
yes, i tried checking "Separate prefix"
nothing works! unglücklich

am i doing anything wrong?
any help greatly appreciated!!!


Posted by pasqualei on 27.11.2012 at 15:23:

RE: Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", an

Have you tried adding the rule at the trunk level?


Posted by bazmercer on 28.11.2012 at 23:07:

RE: Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", an

Hi

Is that the only rule you have in that particular route? As far as I can tell it scans the list of rules and if any overlap it deletes the second one. "0|." is a valid rule, so I'm not sure why it wouldn't like it.

The thing is, this would send any number beginning with a 0 over that trunk. Is that what you want?


Posted by tico on 01.12.2012 at 15:38:

RE: Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", an

well, i want to use 0 only as a trunk override prefix
so if i dial 02525, i want it to be routed via this particular trunk, and i want 2525 to be dialed, not 02525.

or, in another words, i was thinking to place this trunk on top, and set a rule so that only numbers starting with 0 will be let through it, and dialed without leading zero.

this is a basic wish i think, but i didn't find anything on this in help (


Posted by telagente00 on 02.12.2012 at 01:43:

RE: Trunk override with Custom dial pattern - doesnt work? "0|." becomes "0", an

Hi Tico,
I think you should be using an outbound route to select those calls beginning with a 0 and then remove the 0 within the trunk rules.
I'm sure there are old posts about this as well,
Regards

Powered by: Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English translation by Satelk