PBXes (http://www1.pbxes.com/forum/index.php)
- English (http://www1.pbxes.com/forum/board.php?boardid=16)
-- Terminal Equipment (http://www1.pbxes.com/forum/board.php?boardid=21)
--- RE: GoIP GSM<->SIP (http://www1.pbxes.com/forum/threadid.php?threadid=1283513817)


Posted by pisati on 03.09.2010 at 13:36:

GoIP GSM<->SIP

Hi, anyone successfully setup this with pbxes ?
I'm testing it but with no luck...

tnx in advance

S


Posted by ser0303 on 24.01.2011 at 19:16:

RE: GoIP GSM<->SIP

Hi
Here is idea for you http://www.freepbx.org/forum/freepbx/tips-and-tricks/trunk-gsm-gateway-calls


Posted by pisati on 24.01.2011 at 20:02:

RE: GoIP GSM<->SIP

Hi, tnx for reply,

I've managed to do something similar and for incoming work very well, only think is that it is not possible to use it as an outgoing trunk, I've always to call the extension and then after the tone of GoIP gate I need to dial out.
Not 100% clean but work... what it is not clear to me is the so call trunk mode of this device that doesn't seems to work as a real voip trunk...

best regards

S


Posted by Diafora on 07.04.2011 at 10:21:

RE: GoIP GSM<->SIP

If I could take a look at the web interface of the GoIP gateway, I would be able to tell you whether it can act as a SIP trunk or not.

Let me know if you can port-forward its' WebUI.


Posted by pranicv on 10.04.2013 at 20:05:

RE: GoIP GSM<->SIP

Hi there,

I just received a GoIP - 100 single channel GSM gateway/adapter. I would like to configure it to route all incoming calls on the GSM to pbxes. Can anyone help me go about that. I guess I will need to set up a sub pbx or a extension for that. I've got other extensions and softphones working fine but this is something new and hard to find documentation.

Can anyone help?

Thanks!

Powered by: Burning Board Lite 1.0.2 © 2001-2004 WoltLab GmbH
English translation by Satelk