PBXes (http://www1.pbxes.com/forum/index.php)
- English (http://www1.pbxes.com/forum/board.php?boardid=16)
-- Terminal Equipment (http://www1.pbxes.com/forum/board.php?boardid=21)
--- RE: Grandstream HT-503 (http://www1.pbxes.com/forum/threadid.php?threadid=1218184678)

Grandstream HT-503

Hello,

What are the parameters to put in my Grandstream HT-503 ?
I tried almost all combinations but it can't register neither. It works perfectly with other providers.

Thanks for your help,

Raphael.

RE: Grandstream HT-503

Since the HT-503 just entered in the marketplace, can you port forward its' web interface so I can take a look at the configuration you have?

Older Grandstream ATAs work properly with PBXes, but the new HT-503 as well as the HT-502 contain new firmware which supports added features (like local Dial Plan), not yet tested with PBXes.

RE: Grandstream HT-503

I tried but I can't port forward for access.. I'll try again in a minute

Thanks a lot for your help

EDIT : here the downloadable settings :
http://www.raphoumail.com/GUI_HT488.rar
Thanks

RE: Grandstream HT-503

Hey Raphael,

The settings in the archive are from a HT-488 not an HT-503. Please upload the ones from the HT-503, the way you have it configured for your PBXes account.

Take care.

RE: Grandstream HT-503

My mistake, sorry...

here the correct link :

http://www.grandstream.com/user_manuals/GUI/GUI_HT503.rar

Well, I just entered pbxes.org (tried sip.pbxes.org and ip address) with different ports and user login + password...

Thanks for your help,
Raphael

RE: Grandstream HT-503

I have looked through the screenshots of the web interface, and it's at least 50% different from the previous version. So it will not be that easy to configure.

RE: Grandstream HT-503

That's strange because it was really easy for voxalot (just username, password and sip server), as it was for a vmware image of PbxInAFlash. It's just Pbxes that doesn't work... (as formy DVG-G1402S, see other post)

RE: Grandstream HT-503 FXO CID

Hi there!

Is there any testing done with the FXO port of the Grandstream HT-503?

I registered the FXO port with a normal extention and telling the HT-503 to Unconditional Call Forward to a caller group.

Currently on the devices in the caller group, the Extention ID of the FXO is seen, but I would love to see the Caller ID of the one, calling my PSTN/FXO...

Any ideas?

PSTN = NL KPN with CALLER ID.

RE: Grandstream HT-503 FXO CID

How did you register pbxes with HT-503 ? Weeks I'm trying to do so ! Please help ;-)

Thanks a lot

Zitat:

Originally posted by duikerict Hi there! Is there any testing done with the FXO port of the Grandstream HT-503? I registered the FXO port with a normal extention and telling the HT-503 to Unconditional Call Forward to a caller group. Currently on the devices in the caller group, the Extention ID of the FXO is seen, but I would love to see the Caller ID of the one, calling my PSTN/FXO... Any ideas? PSTN = NL KPN with CALLER ID.

RE: Grandstream HT-503

First some specs:

Product Model: HT-503 V1.1B
Software Version: Program-- 1.0.0.15 Bootloader-- 1.0.0.9 Core-- 1.0.0.23 Base-- 1.0.0.66

( I updated it via ADVANCED SETTINGS tab TFTP 168.75.215.189 )

Settings:

Tab: BASIC SETTINGS

- Unconditional Call Forward to VOIP: username-707@ www5.pbxes.org : 5060

Where 707 is an internal ringgroup.

In PBXes I made an incoming route called 'username-707' pointing to ring group 707

Tab: ADVANCED SETTINGS

- Firmware Upgrade and Provisioning: TFTP 168.75.215.189 check every week

Tab: FXS PORT

- Not configured

Tab: FXO PORT

- SIP Server & Outbound proxy: pbxes.org
- Sip transport: UDP
- SIP UserID : an extention i made for this purpose.

RE: Grandstream HT-503

Hello,

Some one has a HT503 (Grandstream)... configuring to bypass? like...

http://www.grandstream.com/products/ht_series/general/documents/ht503_wp_hop_on_hop_off_scenario.pdf

#Route Calls to PSTN.

If some has success with tht... please post the configuration...

Thanks in advance.

RE: Grandstream HT-503

I'd send you my configuration but there's no easy way to do that.

This is basically what I found:

Grandstream Forums

Basically there is this little obscure setting found at the bottom of the FXO setup called "Stage Method". Default is set to 2, change that to a 1.

If it also helps, I setup my Grandstream as a SubPBX.