I have an ex-sipgate Netgear TA612V which is running the unlocked firmware supplied by sipgate. While it will still register ok with sipgate, I cannot get it to register with pbxes. Have configured the sip proxy as pbxes.org:5060.
Looking at my firewall rules, I see it do DHCP, be assigned an IP. It then talks to an ntp server, then opens two stun connections (still configured to use stun.sipgate.co.uk:10000). It never appears to get any further, and doesn't appear to even try to talk to pbxes.org.
Has anyone had any success with this device?
(I am able to connect from the same network segment to pbxes.org using a Grandstream Budgetone phone without problem).
After making a few changes to the netgear it now tries to register but gets back a 404.
The netgear gives user options of
telephone number and username
Looking at a tcpdump it looks like the from line reads:
From username<sip:telephonenumber@217.195.32.11:5060>
I therefore have set both to be mattelton-4201
What I then see is it trying to register from:
From:.mattelton-4201<sip:mattelton4201@217.195.32.11:5060>
Note that the - is removed from the sip: part.
Can someone confirm that this is the cause of the 404? I have tried putting the username in "s and adding a \ infront of the -, but in both cases the - is removed from the username.
The missing dash (-) is definitely the problem, and the proof is the Grandstream which does not truncate it, registers and functions with your PBXes account.
Open an account with Netgear, and ask them to change that behavior of their ATA. The TA612V is a recent product, so they will most probably fix this bug.
